806-383-8833
info@texmexsupply.com
CLICK HERE FREE QUOTE













Chain Link Fittings

Bands

Tension Band 14ga x 3/4"

Tension bands are used to attached tension band to terminal post, with a carriage bolt.

Heavy Tension Band 11ga x 1"

Heavy Tension bands are used to attached tension ban to terminal post, with a carriage bolt.

Brace Band 12ga x 3/4"

Brace Band are used to attach rail end, brace rail, truss rod, tension wire, and barbed wire.

Heavy Brace Band 11ga x 1"

Brace Band are used to attach rail end, brace rail, truss rod, tension wire, and barbed wire.


Sign Mounting Bracket 13ga x 1"

An inexpensive bracket used to mount 2 3/8 post to commercial signs.

Caps / Loop Tops

Dome Cap

Used to keep water out of inner post.

 

 

 

Terminal Bullet Cap


Used to fasten top rail to terminal post. The concave adapter cab be fastened with a tap screw and positioned any degree.

 

Loop Tops


Loop Tops (Also called line post tops or eye tops) are used to hold top rail or tension wire above line post.

 

 

Barb Wire Arms

Heavy 45 degree barbed Wire Arm
These arms are used to hold three strands of barbed wire at a 45 degree angle.

 

 

 

X-Heavy 45 Degree Barbed Arms
Designed to hold three strands of barbed wire at a 45 degree angle. This meets the 250 lbs down pull space.

 

 

 

Domestic Heavy Vertical Barbed Arm
Designed to hold the three strands of barbed wire vertically.

 

 

 

 

Domestic Heavy V-Type Barbed Wire Designed to hold six strands of barbed wire. This arm meets the 250 lbs pull down spec.

 

 

Domestic Steel Corner Barbed Arm
Designed to hold three strands of terminating barbed wire on each side of the arm. Corner barbed arm is held in place with heavy set screws.

 

 

Domestic Pressed Steel V-Type Copper Arm
Designed to hold six strands of terminating barbed wire on each side of the "V" Arm. V-Type Corner arm is held in place with Hoy Set screws.

 

Swing Gate Hardware

Hinge J-Bolt
Used to mount metal panels or hinge gates of of a variety of post types and sizes.

 

 

Post Hinge (Male Hinge)
Post hinge has a 5/8" pin off the past hinge to swivel.

 

 

Gate Hinge (Female Hinge)
Gate hinge allows 5/8" pin off the post hinge to swivel.

 

 

180 Degree Gate Hinges
Pressed Steel 180 degree gate to swing 180 degree from closed to open. Show Sizes.

 

 

Bull Dog Hinge
Commonly used in the commercial field for its rigidity and easy installation. Allows gate to swing 90 degree from closed to open. Show Sizes.

Cox Hinge
Designed to hold the heaviest gates. Allows gate to swing open up to 90 degrees from open to close. Show Sizes.

Heavy Flip Latches
Designed to latch gate to gate post, and allows for pad lock.

 

 

Butterfly Latch
Designed to automatically latch shut. Has a pad lock hole undere the latch.  Fits 1 3/8 Gate Frame.


 

 

Dog Kennel Latch
Designed to keep dogs from pushing latch open with their nose.

 

 

Spring Latch
Can be to mount to 4x4 or metal post. Add Res. D Bar. & Guides.

 

 

Industrial Drop Bar Latch with Guides
Used to latch and lock double drive gates together. Fits gate frames that are 1 5/8 or 1 7/8.

 

 

Wheel for Chain Link Swing Gate
Designed to attach to gate frame inline or offset. Diameter of wheel is 6". Fits 1 3/8, 1 5/8, or 1 7/8 Gate frame.

Gate Accessories

 

Gate Scrolls
A decorative area that mounts to the top of a gate with self tapping screws or can be welded on.

 

 

Special Gate Clips
Used to attach gate fabric to the gates frame. Fits 1 3/8"

 

 

Aluminum Gate Corners
Used to join the vertical and horizontal tubing to make a gate. Fastened by bolts or self tapping screws. Fits 1 3/8"

 

 

Steel Gate Corners
Designed for use in comm. gate to join the vertical and horizontal tubing to make a gate. Fastened with bolts. Fits 1 5/8 or 2"

 

 

Gate Brace Clamp
A two piece clamp used to hold a center bar in a gate with a bolt. Also called a tee clamp. Sizes 1 3/8, 1 5/8

 

 

Panel Clamp
Panel clamps are used to hold dog or temporary panels security. The two piece panels are help together with one 3/8" carriage bolt and leave apprx. 1/2" space between panels.

 

Gate Holdback
Gate holdbacks are mounted to 1 5/8 pipe and are designed to hold gate in a opened position when engaged. Also, called gate keepers.

 

 

Gate Mushroom
Gate mushrooms are designed to hold drop bar and gates in place. Gate mushroom is mounted flush to the ground with a 1 5/8" pipe.

 

 

Truss Rod
Designed to give lift to gates and to help keep truss on corners and ends. 3/8"x11"

 

 

 

 

Truss Rod Tightener
Designed to hold truss rod in place so it can be tightened are also called assemblies.

Slide Gate Hardware

 

Steel Track Roller
Mounts to the frame work of the gate frame, and rolls on top of track. Fits 1 5/8 X 1 5/8

 

 

Pipe Track Bracket
Brackets are designed to hold 1 5/8 track and its mounted to line post and get post with its bolts. Fits 2" or 2 3/8".

Heavy Pipe Track Brackets
More information coming soon.

Universal Pipe Track Bracket
Bracket is mounted to any size post using brace boards.

 

Slide Gate Latch
A two piece latch that is slide into open couples and allows for pad lock.

 

 

Gate Dollys
Designed to aid and support front of roll gate. Built with 6" or 10" rubber wheels and a 6" or 12" axle.

6" Replacement Wheel
Used in replacing worn wheels. Fits a 5/8" shaft.

V-Groove Wheel
A 6"x2" wheel designed to truck slide gates on an angle iron tracking system. Fits 1"x1" angle iron.

 

 

V-Groove Track
V- Groove tracks are used with V-Groove wheels to help truck slide gates. 1/4"x5" plate with 1"x1" angle 10' Overall.

Cantilever Gate Hardware

 

Deluxe Cantilever Rollers
Designed to hold and track 2 1/8" cantilever gates. The deluxe rollers have 1 1/8" axle and roll on needle bearing and greased fittings. Fits 4"x2 3/8"

 

 

Nylon Cantilever Rollers

Designed for high usage gate. The nylon graphite roller allows gate to operate more smoothly. Fits 4"x2 1/8".

 

 

Cantilever Roller Guard
Made to fit over cantilever roller for solety. ASTM F1184-05 requires a guard.

 

 

 

Cantilever Gate Latch
Cantilever latched are used on 2" Gate frame, and fit a 3" or 4" gate post. Allows for pad lock. Fits 3"x2" & 4.

Tools

Chain Link Stretcher Bar
Used to stretch and make chain link tight. A-come-along is attached to the stretcher bar and is used to make chain link fence tight. 42" tall.

 

 

Gate Wire Stretcher
Used to tighten chain link on gates to short stretches. Fits 1 3/8 to 2" & 2 3/8 to 3".

 

Gate Clip Tool
Used to squeeze hog rings onto fence or anything else. Makes far quick and easy installation.

 

 

Hitachi Nail Gun

The Hitachi NV65AH air powered coil siding nailer drives 1-1/2" to 2-1/2" plastic or wire collated coil siding nails.

Chain Link Fence Accessories & Fasteners

 

 

Tension Bars
Flat strips of metal that are used for attaching chain link to terminal post, with aid of tension bands.

 

 

Sleeves
Designed to link two joints of top rail together. Sizes 1 3/8", 1 5/8"

 

 

Rail Ends
Made to hold top rail or brace rail at terminating post.

 

 

Bottom Rail Clamp
Also called a mid rail clamp or bottom clamp. This two piece clamp is held together with two 5/16 carriage bolts, and is designed to hold 180 degrees horizontal rail.

 

Straight Ties and Pig Rings
Straight ties are used to fasten chain link mesh to frame work. Pig rings (also called hog rings) are typically-used to fastening chain link to bottom tension wire.

EZ Twist Ties
Say no more to sore hands. EZ twist ties are quicker, easier, and stronger. Contractors show a 3 to1 installation advantage.

 

 

 

Galvanized Plate
Designed for mounting post to pie-existing concrete area. Plate is welded to post.

 

 

Top to floor Adapter
Also called floor flange and wood rail end. Fits 2 3/8

 

 

Truss Rod
Designed to hold truss rod in place so it can be tightened also called truss rod assemblies.

 

 

 

 

Perlin Strap
12 gax 3/4" two piece strap steel clamp designed to join pipe at 90 degree angles. Used mainly to construction of greenhouses.